![]() Even with BIOS underclocking it, it still will not go more or less than 1.7Ghz. Its single digit or lowerĪlso, i just changed my BIOS base and turbo speed to 15x100 just to see if it would downclock the cpu. Its really beginning to get frustrating that i cant figure this out. The Maximum Frequency value shows the current power consumption by the CPU. ![]() In the run box, enter: perfmon.exe /res and tap the Enter key. Earlier i was trying to play Rocket League with League of Legends home screen running in the background and the game was lagging because of maxed out cpu. Tap the Win+R keyboard shortcut to open the run box. Yes its been set to performance since i received it, and have minimum and maximum processor set to 100%. Balanced should change the clockspeed depending on what's needed, and is the default setting everyone uses. To be clear, what high performance does is run your CPU at the max frequency (4.0GHz in your case) all the time. It should be on "Balanced" for normal operation. If the power option was on "Power Saver", that is very weird (you'd have to have done it yourself pretty much) and could be your issue. Set it to "High Performance" (you might have to click the down arrow which says "Show additional plans". Go to Control Panel > Power Options (search for "power", it should come up with it), and change it (it should be on "Balanced" automatically). Try this, it's not ideal (it's wasteful), but it helps to check if something is keeping your CPU down to preserve power or something similar: The BIOS says it's running at 4.0GHz, but when it goes to Windows is seems to downclock. Also, ran the same test on my original A-10 processor Unlikely, but it's another thing to try and tick off of the list.Īlso, i want to point out these are the results of the new processor i just installed yesterday after sending back the original. If it's anywhere near average the readouts (42% / 1.7GHz) are just wrong. Do a userbenchmark (<- google that word), see how your CPU compares to other 880Ks. Something quick you could try is test if the readouts are just wrong. If that says 4GHz, I'm inclined to believe the BIOS over anything else. So try to find hardware monitoring in the BIOS, see if it lists the actual (not target) CPU speed anywhere. Since you've updated and reset your BIOS, it's likely the motherboards fault, or a REALLY weird Windows error I've never seen.ĭoes your BIOS show the current CPU speed anywhere? Most BIOS's will do that, some only do it in an "advanced" or "expert" mode you can turn on and off. It's more likely either a BIOS setting, a BIOS defect or a hardware defect (your motherboard). That would normally run your CPU at full speed (the highest C-state/Speedstep) always. You could try setting the Energy settings in Windows to Performance instead of Balanced.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |